Skip to Content

Features

  • 2 POE (Power Over Ethernet) outputs, each supplying up to 110W
  • Control options include standard wall controllers, or DMX input via 5-pin XLR, Art-Net, or sACN
  • Occupancy sensor-enabled
  • Supports fixture hot-swapping and automatic fixture detection
  • Current and voltage monitoring
  • RDM compliant

Description

The Logic Drive 2X is designed to feed power and control to remote fixtures using the POE latest standard IEEE 802.3 bt (power over Ethernet) and TCP/IP for control. It has 2 output ports and will support a maximum of 92.5 W/port. The Drive 2X includes one LOGIC Wall Con, which is a single gang wall controller that can recall up to 8 recorded scenes from the Drive 2X. Additional Wall Cons may be added to the system, up to 4 pcs on a single controller to have multiple control locations. The Drive 2X supports DMX, Art-Net, and sACN control protocols, and includes an integrated webserver to configure the date/time settings, which are used in the daily/calendar trigger.

Downloads

Specifications

Construction & Physical Specifications

  • Dimensions: 10.31 x 18.86 x 1.73 in (479 x 245 x 44 mm)
  • Fixture Color: Black
  • Housing Material: Stamped steel
  • Mounting Options: 1U Rack Mount, wall mount via X-slots on bottom of drive housing
  • Weight: 7.6 lb (3.45 kg)

Control Specifications

  • Operating Modes: Selectable in connected fixtures
  • Data Connections:
    • Device Data Input: 1 Ethernet (RJ45) and 1 (5-pin) Phoenix connector
    • Device output support: POE++, IEEE 802.3 bt, type 4, up to class 8
    • Device Data throughout: 1 Ethernet (RJ45) and 1 (5-pin) Phoenix connector
    • Wired remote input: 1 RJ-12 (6-conductor, non-standard termination)
    • Wired remote output voltage: 12 VDC
  • Fixture Setup: Display, RDM, Art-RDM (Artistic License DMX Workshop)
  • Standalone Control: Yes

Electrical System Specifications

  • Electronic
  • Input Voltage: 100 to 240 VAC, 50/60 Hz (auto-ranging)
  • Power and Current:
    • 260 W, 2.60 A @ 100 V
    • 260 W, 2.17 A @ 120 V
    • 260 W, 1.25 A @ 208 V
    • 260 W, 1.14 A @ 230 V
    • 260 W, 1.09 A @ 240 V
  • Power Supply: Electronic internal
  • Recommended Power Cable: 3 x 14 AWG, Belden 2413F, 2412F
  • Required Cable Specifications: Cable type: CAT6/A, shielded, Conductor Diameter: ≥23 AWG (≥0.5733 mm), Conductor Material: Solid Bare Copper Wire (stranded not supported), Cable plug: RJ45, CAT6/A, Shielded, Cable Termination: T568B standard
  • Total Max Cable Length: Drive to first fixture: ≤100 m / 328 ft, Drive to last fixture: ≤140 m / 460 ft, First fixture to last fixture: ≤40 m / 131 ft

Battery Specifications

  • Battery Type: Lithium
  • Rechargeable: No
  • Battery Power: 3 VDC

Thermal Specifications

  • BTU Hour: 887
  • Cooling: Fan-assisted convection
  • Maximum Surface Temperature: 158 °F (70° C)
  • Minimum Distance To Flammable Surface: 11.8 in (0.3 m)
  • Operating Temperature Range: -4 °F to 113 °F (-20 °C to 45 °C)

Regulatory & Voluntary Qualification

  • Canadian Safety: CSA-C22.2 No. 250.2
  • Certification Listings: CE/MET/FCC/RoHS
  • Environment Details: All indoor permanent installations. Please refer to the User Manual for more detailed information on installation.
  • Environment Locations: Dry
  • Installation Orientation: Any/Vertical Only/Horizontal Only
  • US Safety: UL 2108, UL 1598A
  • Warranty: 36-month manufacturer’s limited warranty (for covered regions only)

Accessories

  • Included: Seetronic Powerkon IP65 power cord, 1 LOGICWALLCON, 1 short rack ear bracket, 1 long rack ear bracket
  • Optional: LOGIC Wall Con (additional, up to 3 additional)
  • Required: RDM Device, Power Supply, Power and Data Interface, etc.

Order Code

  • LOGIC DRIVE 2X: LOGICDRIVE2X

Accessories

Logic Wall Controller

Logic Wall Controller